Apc Back-ups Cs 500 Driver For Mac
® Back-UPS ™ CS 350/500 User’s Manual 990-20852/01 4 Switch on the Back-UPS Note: Allow the Back-UPSto charge for a full eight hours prior to use. Press the push-buttonon the front panel of the BackUPS. ON LINE ON BATTERY OVERLOAD REPLACE BATTERY Observe that the following events occur after pressing and releasing the push-button: • The green On-Line indicator flashes. • The yellow On Battery indicator lights while the Self-Test is being performed. • When Self-Test has successfully completed, only the green On Line indicator will be lit. • If the internal battery is not connected, (see Step 1 above) the green On Line indicator and red Replace Battery indicator will light. The BackUPS will also emit a chirping sound.
Use the links on this page to download the latest version of APC UPS drivers. All drivers available for download have been scanned by antivirus program. Samsung usb driver for mac. This page contains information about installing the latest APC Back-UPS BK350 driver downloads using the APC Driver Update Tool. APC Back-UPS BK350 drivers are tiny programs that enable your UPS hardware to communicate with your operating system software.
2 Connect Equipment to the Back-UPS The rear panel of the Back-UPSconsists of the following elements: Battery Back Up Outlets (qty. These outlets provide battery back-up, surge protection, and Electro-magnetic Interference (EMI) filtering. In case of power outage, battery power is automatically provided to these outlets.
Apc Back Ups Cs 500 Driver For Mac
Power (utility or battery) is not supplied to these outlets when the Back-UPS is switched Off. Connect a computer, monitor, and external disk or CD-ROM drive to these outlets.
Surge Only Outlet. This outlet is always On (when utility power is available) and is not controlled by the On/Off switch. This outlet does not provide power during a power outage. Connect a printer, fax machine or scanner to this outlet. Note: The Back-UPSsoftware CD-ROMprovides data reporting and unattended shutdown of computers connected to the device. The User’s Guide contains additional information about the Back-UPSsoftware. The User’s Guide is contained in the main folder with the CD-ROM.
Attention: USB Hubs The Back-UPSshould be plugged into the USB port of the computer, not into a USB hub. The computer must be powered On before connecting the USB cable. Connect the USB cable end (USB symbol facing down) to the rear panel USB port of the Back-UPS.Connect the other end of the USB cable to the USB port (usually located on the rear panel of the computer). Windows 98 ® and Windows Me ® Users The APC Power Management Extensions software has been designed specifically to work with Windows 98 build number 4.10.1998, Windows 98 SE (Second Edition) 4.10.2222A, and Windows Me (Millennium Edition).
To ascertain the build number, go to the Control Panel, open the System dialog and view the System information under the General tab of the dialog. To install the software, perform the following steps: 1.
Please skip to step 4 if running Windows Me. For Windows 98, after connecting the USB cable, the “Add New Hardware Wizard” dialog box is displayed. Insert a Windows 98 operating system CD into the computer CD-ROMdrive before proceeding. Follow the installation instructions on the computer screen. During installation, Windows will need to search for new drivers. When prompted, make sure the CD-ROMdrive box is checked.
After installation of the drivers is complete, a “Windows 98 CD-ROM”dialog box may appear. If this happens, just close the box. Insert the APC Installation CD-ROMinto the computer’s drive. The software user documentation is a file on the main folder of the CD.
The filename is Users Guide.pdf. Follow the installation instructions on the computer screen. If the software does not automatically install, the Windows autorun feature may have been disabled. In this case: Choose “Start” in the taskbar and then the “Run” option. Type the following:: setup.exe. After the installation is complete, the APC plug icon will appear in the taskbar (near the clock). To view the Power Management user interface, double-clickon the APC plug taskbar icon or, alternatively, choose: Start > Settings > Control Panel > Power Management.
Note: Windows 98 and Windows Me categorize a UPS as an HID (Human Interface Device). The Back-UPSis listed in: Control Panel > System > Device Manager > HID category > HID Compliant Device. Windows 2000 ® Users The CD-ROMincluded with this package contains a “wizard” that optimizes a computer system’s power settings for operation with the Back-UPS.It does this by changing various settings in Power Options Properties in the Control Panel. APC strongly advises that the computer system be reconfigured by running this wizard. Insert the APC Power Management CD-ROMinto the computer’s drive.
